Rituximab specific Kit ELISA

N° du produit ABIN2862657

Kit ELISA Chemical , test Colorimetric pour la quantification de Chemical .

Aperçu rapide pour Rituximab specific Kit ELISA (ABIN2862657)

Antigène: Rituximab specific

Reactivité: Chemical

Méthode de détection: Colorimetric

Type de méthode: Sandwich ELISA

Gamme de detection: 0.2-6 μg/mL

Application: ELISA

Type d'échantillon: Serum, Plasma (EDTA - heparin)

Détail du produit

Seuil minimal de détection: 0.2 μg/mL

Fonction: Enzyme immunoassay for the specific and quantitative determination of Rituximab in human serum and plasma.

Marque: ImmunoGuide®

Analytical Method: Quantitative

Specificité: Rituximab (Rituxan®, Mabthera®), no cross reaction to any other CD20 catchers. Here is no cross reaction with any other proteins present in native human serum: 95 different native human sera have been screened and except of 2 (OD values 0,108 and 0,125), all the remaining samples showed OD values of <0,100 (Range: 0,038-0,097). In addition, no cross reaction was observed with the other therapeutic antibodies including Infliximab, Adalimumab, Golimumab, Etanercept, Bevacizumab and Trastuzumab tested at concentrations up to 500 μg/mL.

Sensibilité: 30 ng/mL

Attributs du produit: 0.2 - 6 µg/mL (in case of the recommended sample dilution factor)
30 ng/ml (sensitivity in the well)
This kit measures the free drug concentration without any cross reaction to other CD20 catcher.

Ingrédients:

• 1 x 12 x 8 Microtiter Plate Break apart strips coated with IG-9D5b mAb specific for Rituximab only.
• 5 x 0.5 mL Rituximab Standards A-E 1000, 300, 100, 30 and 0 ng/mL Ready to use. Used for construction of the standard curve. Contains Rituximab, Human Serum, Proteins, Stabilizer and <15mM NaN3.
• 1 x 50 mL Assay Buffer Blue colored. Ready to use. Contains proteins and <15mM NaN3.
• 1 x 12 mL Enzyme Conjugate Red colored. Ready to use. Contains horseradish peroxidase(HRP)-conjugated anti-human IgG mouse monoclonal antibody, Proclin® and stabilizers.
• 1 x 12 mL TMB Substrate Solution Ready to use. Contains 3,3',5,5'-Tetramethylbenzidine (TMB).
• 1 x 12 mL Stop Solution Ready to use. 1 N Hydrochloric acid (HCl).
• 1 x 50 mL Wash Buffer, Concentrate (20x) Contains buffer, Tween® 20 and KathonTM.
• 3 x 1 Adhesive Seal For sealing microtiter plate during incubation.

Matériel non inclus:

• Micropipettes (< 3 % CV) and tips to deliver 5-1000 μL.
• Bidistilled or deionised water and calibrated glasswares (e.g. flasks or cylinders).
• Wash bottle, automated or semi-automated microtiter plate washing system.
• Microtiter plate reader capable of reading absorbance at 450 nm (reference wavelength at 600-650 nm is optional).
• Absorbent paper towels, standard laboratory glass or plastic vials, and a timer.

Information d'application

Indications d'application:

• Before performing the assay, samples and assay kit should be brought to room temperature (about 30 minutes beforehand) and ensure the homogeneity of the solution.
• All Standards should be run with each series of unknown samples.
• Standards should be subject to the same manipulations and incubation times as the samples being tested.
• All steps of the test should be completed without interruption.
• Use new disposable plastic pipette tips for each reagent, standard or specimen in order to avoid cross contamination.

Commentaires:

Rituximab ELISA (mAb-based) is suitable also for using by an automated ELISA processor.

Volume d'échantillon: 20 μL

Durée du test: 1.5 h

Plaque: Pre-coated

Protocole: The Rituximab ELISA is based on Rituximab-specific IG-9D5b monoclonal antibody (mAb). Standards and samples are incubated in the microtitre plate coated with mAb. After incubation, the wells are washed. Anti- human IgG mAb (IG-1B5 clone) conjugated to horse radish peroxidase (HRP) is added and binds to the Fc part of Rituximab specifically captured by the mAb on the surface of the wells. Following incubation, the wells are washed and the bound enzymatic activity is detected by addition of chromogen-substrate. The colour developed is proportional to the amount of Rituximab in the sample or standard. Results of samples can be determined directly by using the standard curve.

Préparation des réactifs:

Wash Buffer: Dilute 10 mL Wash Buffer (up to 200 mL) at the ratio of 1:20 with distilled water.
Warm up at 37 °C to dissolve crystals. Mix vigorously.
Store at 2-8 °C for up to 4 weeks.
Prepare Wash Buffer before starting the assay procedure.

Prélèvement de l'échantillon: Normal serum or plasma collection

Préparation de l'échantillon:

Serum/ Plasma: Initially dilute the Serum/ Plasma (Sample) at the ratio of 1:20 with Assay Buffer.
Sample : Assay Buffer Relation can be 1:20-1:100.
For dilution at 1:20, 10 μL Sample + 190 μL Assay Buffer
For dilution at 1:100, 5 μL Sample + 495 μL Assay Buffer
If any sample, initially diluted as indicated above, produces an OD value above the measuring range it should be rated as "> highest standard". The result should not be extrapolated. The sample in question should be further diluted with Assay Buffer and then retested.

Serum, Plasma (EDTA, Heparin): The usual precautions for venipuncture should be observed. It is important to preserve the chemical integrity of a blood specimen from the moment it is collected until it is assayed. Do not use grossly hemolytic, icteric or grossly lipemic specimens. Samples appearing turbid should be centrifuged before testing to remove any particulate material.

Storage: 2-8 °C &leq,-20 °C (Aliquots)
Keep away from heat or direct sun light.
Avoid repeated freeze-thaw cycles.
Stability: 3 days at 2-8 °C, 6 months at -20 °C

Procédure de l'essai:

1. Pipette 100 μL of Assay Buffer into each of the wells to be used.
2. Pipette 20 μL of each Ready-to Use Standard, and Diluted Samples into the respective wells of microtiter plate. Wells A1: Standard A B1: Standard B C1: Standard C D1: Standard D E1: Standard E F1 and so on: Diluted samples (Serum/Plasma)
3. Cover the plate with adhesive seal. Shake plate carefully. Incubate 30 min at room temperature (RT) (18-25 °C).
4. Remove adhesive seal. Aspirate or decant the incubation solution. Wash the plate 3 X 300 μL of Diluted Wash Buffer per well. Remove excess solution by tapping the inverted plate on a paper towel.
5. Pipette 100 μL of Enzyme Conjugate (HRP-anti human IgG mAb) into each well.
6. Cover plate with adhesive seal. Shake plate carefully. Incubate 30 min at RT.
7. Remove adhesive seal. Aspirate or decant the incubation solution. Wash the plate 3 X 300 μL of Diluted Wash Buffer per well. Remove excess solution by tapping the inverted plate on a paper towel.
8. Pipette 100 μL of Ready-to-Use TMB Substrate Solution into each well.
9. Incubate 15 min at RT. Avoid direct sunlight.
10. Stop the substrate reaction by adding 100 μL of Stop Solution into each well. Briefly mix contents by gently shaking the plate. Color changes from blue to yellow.
11. Measure optical density (OD) with a photometer at 450 nm (Reference at OD620 nm is Optional) within 15 min after pipetting of the Stop Solution.

Calcul des résultats:

A standard curve should be calculated using the standard concentration (X-axis) versus the OD450 (or OD450/620) values (Y-axis). This can be done manually using graph paper or with a computer program. Concerning the data regression by computer we are recommending to primarily use the "4 Parameter Logistic (4PL)" or alternatively the "point-to-point calculation". In case of manual plot there are 2 options: Semilog graph or linear graph . Semilog graph paper is available at http://www.papersnake.com/logarithmic/semilogarithmic/. The concentration of the samples can be read from this standard curve as follows. Using the absorbance value for each sample, determine the corresponding concentration of the drug from the standard curve. This value always has to be multiplied by the dilution factor. If any diluted sample is reading greater than the highest standard, it should be further diluted appropriately with Assay Buffer and retested. Also this second dilution has to be used for calculation the final result.

Précision du teste: Intra-assay CV: <10%.
Inter-assay CV: <10%.

Recovery rate was found to be 96-105% with native human serum and plasma samples when spiked with exogenous Rituximab at 0,6 μg/mL or 6 μg/mL.

Restrictions: For Research Use only

Stockage

Buffer: < 15mM NaN3

Agent conservateur: Sodium azide

Précaution d'utilisation: This product contains Sodium azide: a POISONOUS AND HAZARDOUS SUBSTANCE which should be handled by trained staff only.

Stock: 4 °C

Stockage commentaire: The kit is shipped at ambient temperature and should be stored at 2-8°C.
Keep away from heat or direct sun light.
The storage and stability of specimen and prepared reagents is stated in the corresponding chapters.
The microtiter strips are stable up to the expiry date of the kit in the broken, but tightly closed bag when stored at 2-8°C.

Date de péremption: 24 months

Détail du antigène

Antigène: Rituximab specific

Sujet: Rituximab is a genetically engineered chimeric murine/human monoclonal antibody directed against the CD20 antigen found on the surface of normal and malignant B lymphocytes. The antibody is a glycosylated IgG1 kappa immunoglobulin containing murine light- and heavy-chain variable region sequences (Fab domain) and human constant region sequences (Fc domain). Rituximab is composed of 1,328 amino acids and has an approximate molecular weight of 144 kD. Rituximab has a high binding affinity for the CD20 antigen. Identification of biomarkers for (non-) response and risk factors for adverse drug reactions that might be related to serum drug levels and maintaining the effective concentration in order to potentially avoid some side effects with a reliable method might be beneficial.

Poids moléculaire: 144 kDa